AUDIO TECHNOLOGY C-QUENZE DRIVER

Hexacoil voice coil winding technique is used. The features such as: The mid-range is measured mounted on a baffle with the following conditions: All the materials used, were picked to obtain the trust worthiest midrange reproduction. Hexacoil voice coil winding technique is used.

Uploader:	Nilrajas
Date Added:	7 December 2016
File Size:	66.79 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	97426
Price:	Free* [*Free Regsitration Required]

The high ventilation factor through the centre pole piece, under the rear suspension and the perforation to the voice coil, are naturally kept intact, enabling the moving system to accelerate without any compression.

List of products by manufacturer AudioTechnology

SD system, Kapton voice-coil former and under-hung motor structure is available in the C-Quenze drivers. This is an unique possibility for DIY: Note the very flat impedance response.

Hexacoil voice coil winding technique is used. The drivers are extremely fast and move without any dynamic compression due to the mechanical construction. Flush-mounted on center-line aurio driver unit centered on the baffle.

AudioTechnology 18H52 'C-Quenze' - € : , Loudspeaker shop

The mid-range is measured mounted on a baffle with the technklogy conditions: C-Quenze drivers are based on the same technology as the Flexunits. C-Quenze cones or cones with a similar height can be used.

Frequency response curves in the C-Quenze drivers have been improved, compared to the Flexunits. C-Quenze - our newest line of Loudspeaker Drivers. Drivers with Kapton voice-coil former often perform a more detailed midrange with higher dynamic and less coloration and distortion. It also has a special mid-range surround which helps eliminating the cone-edge resonance seen in the 15H mid-woofer version. Low odd order harmonics, but the harmless second order harmonics increases with higher SPL.

18H52 1706SD

The distortion measurements are done in near-field and the amplifier output level was adjusted for each driver so that the fundamental is 85dB, 90dB and 95dB at 1m. Very smooth frequency response with no signs of cone-edge resonance frequency dips or cone break-up peaks.

The features such as: The best part of energy during development was put into technllogy of the performance in the midrange area.

Very smooth frequency response and the mid-range can be used up to Voice coil winding height, magnetic gap height and magnet sizes.

C-Quenze drivers are based on the same technology as the Flexunits, but use a solid die cast basket instead of the modular basket used in Flexunits. Very close match between sample 1 and 2. Slightly rising frequency response from 3. All the materials used, were picked to obtain the trust worthiest midrange reproduction.

» AudioTechnology 15HSDKM

Voice coil winding height, magnetic gap height and magnet sizes. Nice consistency between the two driver unit samples. The features such as: The high ventilation factor through the centre pole piece, under the rear suspension and the perforation to the voice coil, are naturally kept intact, enabling the moving system to accelerate without any c-quenez.

The drivers are extremely fast and move without any dynamic compression due to the mechanical construction.

All the materials used, were picked to obtain the trustworthiest midrange reproduction. The best part of energy during development was put into refinement of the performance in the midrange area. Frequency response valid down to Hz.

Mid-woofer near-field measurement at technolohy Frequency Range Mid-woofer: Hexacoil voice coil winding technique is used.